Hello amigurumi lovers and beautiful visitors, I wanted to share the free amigurumi patterns for you here. In my article I will share 1 pattern and how to make it for you. At the end of my article, I will share amigurumi patterns that can generate ideas for you.
Symbols
Satn – table without cape
pr – increase
ub – decrease
vp – air loop
ss – connection column
pssn – half-column with nakid
ub-pssn – reduce half-columns with nakid
Warcher
Feet ( 2 details )
Gray color
Row 1: 6 Sat in Amigurumi Ring ( 6 )
Row 2: 6 pr ( 12 )
Row 3: ( 1 Sat, 1 pr ) – 6 times ( 18 )
Row 4-5: 18 Sat ( 18 )
Row 6: 4 y, 10 Sat ( 14 )
Row 7: 5 y, 4 Sat ( 9 )
Fill with a filler.
Row 8-12: 9 Sat ( 9 )
Row 13: ( 2 Sat, 1 pr ) – 3 times ( 12 )
Row 14: 12 Sat ( 12 )
Fasten the thread and fill the leg to the end. Tie the second part, but at the end do not fix the thread.
Body
Gray color
Row 1: take two legs, place nearby, make sure they look in the same direction. Jump at the junction of the legs. Next — Satn in the remaining 23 loops of both legs in a circle ( 24 )
Row 2-5: 24 Sat ( 24 )
Row 6: ( 2 Sat, 1 UB ) – 6 times ( 18 )
Row 7-8: 18c Sat ( 18 )
Row 9: ( 1 Sat, 1 UB ) – 6 times ( 12 )
Row 10-12: 12 Sat ( 12 )
Fill with a filler.
Hands ( 2 details )
Gray color
Row 1: 4 Sat in Amigurumi Ring ( 4 )
Row 2: 4 pr ( 8 )
Row 3-5: 8 Sat ( 8 )
Row 6: 2 UB, 4 Sat ( 6 )
Row 7-13: 6 Sat ( 6 )
Fasten the thread by leaving the tail for sewing. Nabeyte.
Shorts
Blue
Row 1: 18 vp connect the chain into the ring using ss ( 18 )
Row 2-4: 18 Sat ( 18 )
Fasten the thread. Tie the second leg, but don’t finish knitting.
Row 5: connect both parts together as you connected the legs of the amigurumi bunny and tie 36 Sat ( 36 )
Row 6: ( 4 Sat, 1 UB ) – 6 times ( 30 )
Row 7: 30 Sat ( 30 )
Row 8: ss, 2 vp, 2 pssn, 1 ub-pssn, ( 3 pssn, 1 ub-pssn ) – 5 times ( 24 )
1 ss, fix the thread, refuel the end. Put shorts on your knitted bunny.
Short suspenders ( 2 parts )
Attach the thread to the top edge of the shorts at the back. Jump 23vp, then starting from the second from the hook of the loop 22 Sat. Firmly attach the connected part in the place where you joined the thread at the start, using ss. Then sew its second end in front. Please note that the suspenders from behind are crosswise. Do the same with the second detail.
Head
Gray color
Row 1: 6 Sat in Amigurumi Ring ( 6 )
Row 2: 6 pr ( 12 )
Row 3: 6 Sat, ( 1 Sat, 1 pr ) – 3 times ( 15 )
Row 4: 6 Sat, ( 2 Sat, 1 pr ) – 3 times ( 18 )
Row 5: 6 Sat, ( 3 Sat, 1 pr ) – 3 times ( 21 )
Row 6: 6 Sat, ( 4 Sat, 1 pr ) – 3 times ( 24 )
Row 7: 6 Sat, ( 5 Sat, 1 pr ) – 3 times ( 27 )
Row 8: 6 Sat, ( 6 Sat, 1 pr ) – 3 times ( 30 )
Row 9: 6 Sat, ( 7 Sat, 1 pr ) – 3 times ( 33 )
Row 10: 6 Sat, ( 8 Sat, 1 pr ) – 3 times ( 36 )
Row 11-15: 36 Sat ( 36 )
Row 16: ( 4 Sat, 1 UB ) – 6 times ( 30 )
Row 17: ( 3 Sat, 1 UB ) – 6 times ( 24 )
Row 18: ( 2 Sat, 1 UB ) – 6 times ( 18 )
Row 19: ( 1 Sat, 1 UB ) – 6 times ( 12 )
Cut two ovals of white felt-tip felt for the eyes, make small holes in the center of them. Put the safe eyes ( eyes on the thread ) through these holes. Then stick your eyes and fix them between 5 and 6 near your head, at a distance of 7 Satnes from each other.
Row 20: 6 UB ( 6 )
Fasten the thread, sew the hole with the remaining end or pull off.
Ears ( 2 details )
Gray color
Row 1: 6 Sat in Amigurumi Ring ( 6 )
Row 2: 6 pr ( 12 )
Row 3: ( 1 Sat, 1 pr ) – 6 times ( 18 )
Row 4-8: 18 Sat ( 18 )
Row 9: ( 1 Sat, 1 UB ) – 6 times ( 12 )
Row 10-14: 12 Sat ( 12 )
Fasten the thread by leaving the tail for sewing.
Tail
Gray color
Row 1: 6 Sat in Amigurumi Ring ( 6 )
Row 2: 6 pr ( 12 )
Row 3-4: 12 Sat ( 12 )
Fasten the thread by leaving the tail for sewing. Stuff, but not much.
Windower
The body, pens, legs and tail fit in the same way as the boy’s hare.
Head
Gray color
Row 1: 6 Sat in Amigurumi Ring ( 6 )
Row 2: 6 pr ( 12 )
Row 3: ( 1 Sat, 1 pr ) – 6 times ( 18 )
Row 4: 10 Satn, ( 1 Sat, 1 pr ) – 4 times ( 22 )
Row 5: 10 Satn, ( 2 Sat, 1 pr ) – 4 times ( 26 )
Row 6: 10 Satn, ( 3 Sat, 1 pr ) – 4 times ( 30 )
Row 7: 10 Satn, ( 4 Sat, 1 pr ) – 4 times ( 34 )
Row 8: 10 Satn, ( 5 Sat, 1 pr ) – 4 times ( 38 )
Row 9-14: 38 Sat ( 38 )
Row 15: 1 UB, 6 Sat, 1 UB, 28 Satn ( 36 )
Row 16-20: follow the instructions for knitting the head of the boy’s hare.
Ears ( 2 details )
Gray color
Row 1: 6 Sat in Amigurumi Ring ( 6 )
Row 2: 6 Sat ( 6 )
Row 3: 6 pr ( 12 )
Row 4-5: 12 Sat ( 12 )
Row 6: ( 1 Sat, 1 pr ) – 6 times ( 18 )
Row 7-8: 18 Sat ( 18 )
Row 9: ( 1 Sat, 1 UB ) – 6 times ( 12 )
Row 10-14: 12sbn ( 12 )
Fasten the thread by leaving the tail for sewing.
Swimsuit
Swimming
Pink
Row 1: 34 vp connect using ss ( 34 )
Row 2: 34 Sat, 1 ss, 1 vp ( 34 )
Next, knit the back of the swimming trunks in rows, without connecting to the circle.
Row 1: 12 Sat, 1 W, turn ( 12 )
Row 2: 2 UB, 4 Sat, 2 UB, 1 VP, ( 8 )
Row 3: 4 UB, 1 Vp, turn ( 4 )
Row 4: 4 Sat, 1 W, turn ( 4 )
Row 5: 2 UB, 1 W, turn ( 2 )
Row 6: 2 Sat ( 2 )
Fasten the thread.
Front part
Row 1: attach the pink yarn to the front of the belt, retreating 5 loops from the connected rear. Tie 12 Satn, 1 Wp, turn ( 12 )
Row 2: 2 UB, 4 Sat, 2 UB, 1 VP, ( 8 )
Row 3: 4 UB, 1 Vp, turn ( 4 )
Row 4: 4 Sat, 1 W, turn ( 4 )
Row 5: 2 UB, 1 W, turn ( 2 )
Row 6: 2 Sat ( 2 )
Fasten the thread. Sew the back and front.
Tie the outer sides of the yellow yarn panties.
Top
Row 1: 31 vp, starting from the second from the hook of the loop 30sbn ( 30 )
Row 2-4: 1 pack, turn, 30 Sat ( 30 )
Fasten the thread. Tie the top of the yellow yarn, put it on a bunny and sew it.
Assembly
Sew the details of your amigurumi toys in a way convenient for you.
Feel free to tag me (@freeamigurumii) in your photos on Instagram or Facebook if you’d like!
All Finished.
