Hello amigurumi lovers and beautiful visitors, I wanted to share the free amigurumi patterns for you here. In my article I will share 1 pattern and how to make it for you. At the end of my article, I will share amigurumi patterns that can generate ideas for you.
Pay attention:
Each part should be tightly stuffed with ( if required by ), given that the hinges should not diverge and the stuffing should look out.
Ligidity of the viscosity: the exact knitting density for this toy is not very important, but loops need to be tied tight enough, so you should choose a hook suitable for your yarn size. The sample was connected by a medium-thick cotton yarn ( 4 Medium ) with a hook of 3.5 mm.
You will need:
- hook 3.5 mm;
- a needle with a large ear and a dumb tip;
- marker for loops;
- fibrous stuffing;
- middle weight yarn ( 4 Medium ).
This project uses the following types of loops:
vp = air loop
SBN = pillar without cape
connection Art. = connecting column
bump * Nakid, insert the hook into the loop, cloak and pull out the loop, cloak and tie 2 loops on the hook. Repeat from * 2 times to the same loop ( 4 loops ) will remain on the hook. Nakid and tie all the loops on the — hook will get a bump. I’ll pull the loop, pulling the thread.
2 SBN together ( decrease ) = tie together 2 SBN ( insert the hook into the next loop and pull out ) x 2 times, cape and tie 3 loops on the hook — decrease 1 SBN.
PSN = half-column with nakid
CH = cloak column
How to tie an amigurumi ring?
- Place the thread so that the tail lies in your palm and the working thread passes behind the brush.
- Once wrap the working thread around your fingers.
- Place the working thread behind the resulting loop.
- Enter the hook and pull out the loop of the working thread.
- Finish your initial chain of air loops as indicated in the circuit.
- Jump into the ring of KR 1 ( you will tie around the loop and the end of the thread )
- At the end of KR 1, pull the end of the thread and tighten the ring tight.
The body of the lamb
Amigurumi ring with white thread
KR 1: 2 vp ( do not count as a loop ), 14 CH in the ring. Lock in the first SN with a connection column. Stretch tight.
KR 2: 1 vp, * Sishechka in the next loop, 2 SBN next. loop. Repeat from * in a circle. Close. — 21 loops.
KR 3: 1 vp, * 2 SBN per next., 2 SBN. Repeat from * in a circle. Close. — 28 loops.
KR 4: 1 vp, * SBN next, bump, 2 SBN next, bump. Repeat from * in a circle. Close. — 35 loops.
KR 5: 1 vp, * 2 SBN per next, 4 SBN. Repeat from * in a circle. Close. — 42 loops.
KR 6: 1 vp, ( SBN, bump, 2 SBN, bump, SBN, bump ) x 6 times. ( SBN, bump, SBN, bump, SBN, bump ) in the last 6 loops. Close — 48 loops.
KR 7: 1 vp, SBN in a circle. Close up.
KR 8: 1 vp, * bump, 2 SBN. Repeat from * in a circle. Close up.
KR 9: 1 vp, SBN in a circle. Close up.
KR 10: 1 vp, * 2 SBN, bump. Repeat from * in a circle. Close up.
KR 11: 1 vp, SBN in a circle. Close up.
KR 12-31: Repeat KR8-11 five times.
Start stuffing your body as you knit.
KR 32: 1 vp, ( bump, SBN, bump, decrease of SBN, bump, SBN ) x 6 times ( bump, SBN, bump, SBN, bump, SBN ) to the end. Close. — 42 loops.
KR 33: 1 vp, * 4 SBN, reduction of SBN in a circle. Close. — 35 loops.
KR 34: 1 vp, ( bump, decrease of SBN, bump, SBN ) in a circle. Close. — 28 loops. KR 35: 1 vp. ( 2 SBN, decrease SBN ) in a circle. Close. — 21 loops.
KR 36 and 37: 1 vp, SBN in a circle. Close up.
KR 38 and 39: 1 vp, 3 PSN, 14 SBN, 4 PSN. Close. — 21 loops.
Close the last loop, leaving a long tail for sewing. Tightly fill the whole body, including the neck.
Head
The head of the lamb fits from the nose in continuous circles. Do not close the rows and do not turn over the knitting.
Amigurumi ring with black thread
KR 1: 6 SBN in the ring. Stretch the ring tight. Designate the first loop to start the Kyrgyz Republic. Move the marker after each row.
KR 2: 2 SBN in each SBN in a circle ( 12 loops )
KR 3: *2 SBN next. SBN, SBN next. SBN. Repeat from * in a circle — 18 loops.
KR 4: *2 SBN next. SBN, SBN next. 2 SBN. Repeat from * in a circle — 24 loops.
KR 5: *2 SBN next. SBN, SBN next. 3 SBN. Repeat from * in a circle — 30 loops.
KR 6: *2 SBN next. SBN, SBN next. 4 SBN. Repeat from * in a circle — 36 loops.
KR 7: *2 SBN next. SBN, SBN next. 5 SBN. Repeat from * in a circle — 42 loops.
KR 8: *2 SBN next. SBN, SBN next. 6 SBN. Repeat from * in a circle — 48 loops.
KR 9: *2 SBN next. SBN, SBN next. 7 SBN. Repeat from * in a circle — 54 loops.
KR 10-15: SBN in a circle.
KR 16: *decrease of SBN, SBN in the following. 16 loops. Repeat from * in a circle — 51 loops.
KR 17-20: SBN in a circle.
KR 21: *decrease of SBN, SBN in the following. 15 loops. Repeat from * in a circle — 48 loops.
KR 22-25: SBN in a circle.
KR 26: *decrease of SBN, SBN in the following. 14 loops. Repeat from * in a circle — 45 loops.
KR 27-38: SBN in a circle.
KR 39: *reduction of SBN, SBN next. 3 SBN. Repeat from * in a circle — 36 loops.
KR 40: *reduction of SBN, SBN next. 4 SBN. Repeat from * in a circle — 30 loops.
KR 41: *reduction of SBN, SBN next. 3 SBN. Repeat from * in a circle — 24 loops.
KR 42: *reduction of SBN, SBN next. 2 SBN. Repeat from * in a circle — 18 loops.
KR 43: *reduction of SBN, SBN next. SBN. Repeat from * in a circle — 12 loops. Stuff your head.
KR 44: Dilute of the SBN in a circle.
Close the last loop and hide the ends of the threads.
Woolen hat
KR 1-13: knit according to the scheme of the Kyrgyz Republic 1-13 bodies.
KR 14: coed. by circle.
Close the last loop, leaving a long tail for sewing.
Ears: 2 pcs.
Ears are sluggish in continuous circles.
Amigurumi ring with black thread
KR 1: 6 SBN in the ring. Stretch the ring tight.
KR 2: ( 2 SBN next. p., 2 SBN ) x 2 times — 8 loops.
KR 3: ( 2 SBN next. p., 3 SBN ) x 2 times — 10 loops.
KR 4: ( 2 SBN next. p., 4 SBN ) x 2 times — 12 loops.
KR 5: ( 2 SBN next. p., 5 SBN ) x 2 times — 14 loops.
KR 6: SBN in a circle.
KR 7: ( 2 SBN next. p., 6 SBN ) x 2 times — 16 loops.
KR 8-10: SBN in a circle.
KR 11: ( reduction of SBN, SBN next. 6 loops ) x 2 times. — 14 loops.
KR 12-21: SBN in a circle.
Close the last loop, leaving a long tail for sewing.
Eyes: 2 pcs.
Amigurumi ring with white thread
KR 1: 6 SBN in the ring. Close up.
KR 2: 2 SBN in each loop in a circle. Close — 12 loops.
Close the last loop, leaving a long tail for sewing.
Pupils: 2 pcs.
Amigurumi ring with black thread
KR 1: 6 SBN in the ring. Close up. Close the last loop, leaving a long tail for sewing.
Legs: 4 pcs.
Legs fit in continuous circles.
Amigurumi ring with black thread
KR 1: 6 SBN in the ring. Stretch the ring tight.
KR 2: 2 SBN in each SBN in a circle ( 12 loops )
KR 3: *2 SBN next. SBN, SBN next. SBN. Repeat from * in a circle — 18 loops.
KR 4: *2 SBN next. SBN, SBN next. 2 SBN. Repeat from * in a circle — 24 loops.
KR 5-8: SBN in a circle.
KR 9: *reduction of SBN, SBN next. 2 SBN. Repeat from * in a circle — 18 loops.
KR 10: *reduction of SBN, SBN next. SBN. Repeat from * in a circle — 12 loops.
KR 11-41: SBN in a circle. Close the last loop, leaving a long tail for sewing.
Tail
Amigurumi ring with white thread
KR 1: 2 vp, ( do not count as a loop ), 12 CH in the ring. Close up. Tightly tighten the ring — 12 loops.
KR 2: 1 vp, * bump, 2 SBN per next. Repeat from * in a circle. Close — 18 loops.
KR 3: 1 vp, * 2 SBN per next., 2 SBN. Repeat from * in a circle. Close — 24 loops.
KR 4: 1 vp, * SBN, bump, 2 SBN next, bump. Repeat from * in a circle. Close — 30 loops.
KR 5: 1 vp, SBN in a circle. Close up.
KR 6: 1 vp, * bump, 2 SBN. Repeat from * in a circle. Close up.
KR 7: 1 vp, SBN in a circle. Close up.
KR 8: 1 vp, * 2 SBN, bump. Repeat from * in a circle. Close up.
KR 9: 1 vp, SBN in a circle. Close up.
KR 10-13: repeat KR6-9.
KR 14: 1 vp, * bump, decrease of SBN, bump, SBN. Repeat from * in a circle. Close — 24 loops.
KR 15: 1 vp, * 2 SBN, decrease SBN, repeat from * in a circle. Close — 18 loops. Start the stuffing.
KR 16: 1 vp, * SBN, SBN decrease. Repeat from * in a circle. Close — 12 loops.
Close the last loop, leaving a long tail for sewing. Finish stuffing your tail.
End of work
Sew a hat to a smaller end of the head. Put your head to your neck. The neck is slightly tilted to get a good angle of inclination of the head. Make sure the neck is tightly full so that the head does not hang out.
Sew the pupils in the center of the proteins, sew them to the head along the hair line ( since Sean’s eyes are slightly bulky, you can add a small amount of stuffing as you sew the eyes to your head ).
Put your ears in half on the smaller side and sew up their lower edge in this position. Sew on the sides of the head.
Sew legs / arms on the sides and bottom of the body. Sew your tail in the back center between your legs.
We hope you enjoyed this scheme! You can share your knitted toys in the comments on the post.
Feel free to tag me (@freeamigurumii) in your photos on Instagram or Facebook if you’d like!
All Finished.
