Hello amigurumi lovers and beautiful visitors, I wanted to share the free amigurumi patterns for you here. In my article I will share 1 pattern and how to make it for you. At the end of my article, I will share amigurumi patterns that can generate ideas for you.
You will need:
- yarn of different colors: a few shades of blue, sand and yellow, a little white for the eyes, stuffing,
- safe eyes,
- gobelen needle,
- a hook of the right size.
The size of the knitted toy:
Height — 20 cm
Symbols:
KR – Circular
SBN – pillar without cape
PSN – half-column with nakid
CH – cloak column
C2H – column with two capes
having fallen. SBN – decrease, tie two columns together
vp – air loop
p. – loop
connection Art. – connecting column
*…* — the repetition area is highlighted with asterisks
( .. ) – the total number of loops is indicated in brackets
Spot around the eye ( 2 pcs. )
4.5 mm hook and white yarn of sea shell 6 SBN in the ( 6 loops )
KR1: 1 SBN, ( 1 SBN, 1 PSN, 1 CH, 1 PSN, 1 SBN ) next. p., 1 SBN, 1 co-ed. Art. ( 7 loops )
Close the last loop.
Head and neck
With a hook of 4.5 mm and blue yarn of ocean color, tie the amigurumi ring, 6 SBN in the ring. ( 6 loops )
KR1: 2 SBN in each p. To the end ( 12 loops )
KR2: * 1 SBN, 2 SBN per next. p. *, repeat to the end ( 18 loops )
KR3: * 2 SBN, 2 SBN per next. p. *, repeat to the end ( 24 loops )
KR4: * 3 SBN, 2 SBN per next. p. *, repeat to the end ( 30 loops )
KR5-9: 1 SBN in each p. To the end.
KR10: * 3 SBN, having fallen. SBN *, repeat to the end ( 24 loops )
Insert safe eyes into the center of the specks, then insert between the KR7 and KR8 heads, at a distance of approximately 9 loops from each other, so, so that the pointed part of the speck is directed towards the back of the head.
KR11: * 2 SBN, having fallen. SBN *, repeat to the end ( 18 loops )
KR12: * 1 SBN, having fallen. SBN *, repeat to the end ( 12 loops )
KR13-16: 1 SBN in each p. To the end.
KR17: * 3 SBN, 2 SBN per next. p. *, repeat to the end ( 15 loops )
KR18: * 4 SBN, 2 SBN per next. p. *, repeat to the end ( 18 loops )
KR19: 1 SBN in each p. To the end.
KR20: * 5 SBN, 2 SBN per next. p. *, repeat to the end ( 21 loops )
KR21: Repeat KR19. Close the last loop.
Beak
With a hook of 4.5 mm and sand and yellow yarn tie the amigurumi ring, 3 SBN in the ring. 3 loops
KR1: 2 SBN in each p. To the end ( 6 loops )
KR2: 1 SBN in each p. To the end.
Row 3: * 1 SBN, 2 SBN per next. p. *, repeat to the end ( 9 loops )
Row 4: * 2 SBN, 2 SBN per next. p. *, repeat to the end ( 12 loops )
Close the last loop.
The stick of the pen on the head ( 3 pcs. )
With a hook of 4.5 mm and blue yarn of ocean color, tie the amigurumi ring, 6 SBN in the ( 6 loops )
KR1: 1 SBN in each p. To the end.
Close the last loop, leaving the tail 15 cm.
The leg of the pen on the head ( 3 pcs. )
4.5 mm hook and dolphin yarn 6 vp ( 6 loops )
Row 1: Starting from the second hook loop, 1 SBN in each p. To the end ( 5 loops )
Close the last loop, leaving the tail 15 cm.
Body
With a hook of 4.5 mm and blue yarn of ocean color, tie the amigurumi ring, 6 SBN in the ( 6 loops )
KR1-7: Repeat KR 1-7 heads and neck ( 30 loops )
KR8: * 3 SBN, having fallen. SBN *, repeat to the end ( 24 loops )
Take a blue dolphin yarn
KR9-13: 1 SBN in each loop to the end.
Go to the blue yarn
KR14-17: 1 SBN in each p. To the end.
KR18: * 2 SBN, having fallen. SBN *, repeat to the end ( 18 loops )
To fill
KR19: * 1 SBN, having fallen. SBN *, repeat to the end ( 12 loops )
KR20: Killing. SBN to the end ( 6 loops )
Cut the thread with a tapestry needle, pull the ponytail through the remaining 6 loops and close.
Wing ( 2 pcs. )
With a hook of 4.5 mm and a blue yarn of dolphin color tie the amigurumi ring, 6 SBN in the ( 6 loops )
KR1: 2 SBN in each p. To the end ( 12 loops )
KR2: 4 SBN, 2 PSN in the following. p., ( 1 CH, 1 C2H ) in the next. p., ( 1 C2N, 1 CH ) in the next, 2 PSN in the next. p., 4 SBN, 1 connection Art. next ( 16 loops )
Close the last loop.
Part of the tail ( 5 pcs. )
With a hook of 4.5 mm and blue yarn tie the amigurumi ring, 6 SBN in the ( 6 loops )
KR1: 2 SBN in each p. To the end ( 12 loops )
KR2-4: 1 SBN in each p. To the end. Close last p.
Please note: you need to hide the ends of the first parts of the tail, but leave at the last part and continue the tail as follows:
Tail
4.5 mm hook and yarn blue from the last part of the tail:
12 SBN in the circle of this part, 6 SBN in each of the following three parts of the tail, 12 SBN in the last part of the tail, 6 SBN in each of the following three parts ( 60 loops )
KR1: 1 SBN in each p. To the end.
KR2: * 3 SBN, having fallen. SBN *, repeat to the end ( 48 loops )
KR3: * 6 SBN, having fallen. SBN *, repeat to the end ( 42 loops )
KR4: repeat KR 1
KR5: * 5 SBN, having fallen. SBN *, repeat to the end ( 36 loops )
Go to the yarn of dolphin
KR6: repeat KR 1
KR7: * 4 SBN, having fallen. SBN *, repeat to the end ( 30 loops )
KR8: repeat KR 1
KR9: * 3 SBN, having fallen. SBN *, repeat to the end ( 24 loops )
KR10-11: 1 SBN in each p. To the end.
KR12: * 2 SBN, having fallen. SBN *, repeat to the end ( 18 loops )
KR13: * 1 SBN, having fallen. SBN *, repeat to the end ( 12 loops )
KR14: Killing. SBN to the end ( 6 loops )
Cut the thread with a tapestry needle, pull the ponytail through the remaining 6 loops and close.
Front tail pen ( 5 pcs. )
With a hook of 4.5 mm and blue yarn of ocean color, tie the amigurumi ring, 6 SBN in the ( 6 loops )
Go to the yarn of dolphin
KR1: 2 SBN in each p. To the end ( 12 loops )
Change the yarn at the same time
KR2: 4 SBN, 2 PSN in the following. p., ( 1 CH, 1 C2H ) next. p., ( 1 C2N, 1 CH ) in
trace p., 2 PSN in the following. p, 4 SBN, 1 soyuz. next ( 16 loops )
Close the last loop.
The rear tail pen ( 5 pcs. )
With a hook of 4.5 mm and sand and yellow yarn knit according to the wing pattern.
Paws
With a hook of 4.5 mm and sand and yellow yarn tie the amigurumi ring, 6 SBN in the ( 6 loops )
KR1: 2 SBN in each p. To the end ( 12 loops )
KR2: * 1 SBN, 2 SBN per next. p. *, repeat to the end ( 18 loops )
KR3: behind the front walls of the loops, * ( 1 soybean, 4 vp, 1 soyed. Art. ) in each of the 3rd tracks. loops **, 1 soy. Art. in each of the tracks. 2 loops, repeat from * to ** 1 time, 8 SBN
KR4: behind the back walls of the loops of the previous Kyrgyz Republic, ( 1 SBN, dropping. SBN ) to the end ( 12 loops )
KR5: Killing. SBN to the end ( 6 loops )
Cut the thread with a tapestry needle, pull the ponytail through the remaining 6 loops and close.
Collecting knitted toys
1 ) Stuff your head and neck. Sew to the upper front of the body. On the edge, sew spots around the eyes to the head. Stuff the beak and sew it between the spots.
Useful advice: sewing up spots, wings and feathers with small straight stitches between the V-shaped loops of the last Kyrgyz Republic, you will get a neat seam.
2 ) Fold each leg of the pen in half and sew the edges together using the ponytails. Insert the tail from each hand of the pen into the tapestry needle and pull the thread through the 6 remaining loops, insert the end of each leg of the pen into the tip of the pen and tighten the tight closer to the hole. Sew a pair of stitches through the leg to secure. Close the last loop. Sew three tips of the pen at the base and sew them in the center of the head.
3 ) Sew wings on both sides of the body in a pointed part back.
4 ) Sew your legs to the base of the body with your fingers forward.
5 ) Fix the front tail pen to each part of the tail with a pin and sew the edges in place, stitching through the pen and both layers of the tail, and each suitable rear tail feather to the back, without stitching through both layers. Sew together the tops of the tail feathers. Sew the base of the tail to the back of the body. Stitch through both layers of the tail and into the body from the base to KR 10 until it is securely fixed.
Feel free to tag me (@freeamigurumii) in your photos on Instagram or Facebook if you’d like!
All Finished.
